The Super Stickers® are maintained using regular custodial floor maintenance routines. If you apply Super Stickers® products to a floor that is routinely maintained using buffing or scrubbing equipment, wax the Super Stickers® products as soon as possible after applying it to the floor. This protects the Super Stickers® products from premature wear due to routine floor maintenance. Following the application and waxing, keep the Super Stickers® products and surrounding floor surface clean and dry for at least four hours; do not scrub or buff the area during that time.
If the Super Stickers® products have been waxed over with several layers of wax, then buffing, sanding, or stripping is possible. Do not buff, sand, or strip Super Stickers® products that have not been waxed. Based on customer trial and feedback, our Super Stickers® products can be stripped of floor wax, lightly sanded to remove floor wax, buffed and re-waxed while still maintaining their adhesive quality. However, we are still gathering data and research, and due to various stripping detergents, and equipment, results can vary. It is recommended to test a small area prior to buffing or stripping the entire area.